Table of Contents
Garage Door Will Not Close – Opening and closing are the main jobs of your Garage Door.
We are in deep trouble if they suddenly stop doing them.
Now, there are a lot of reasons why this would happen.
We need to know which of them is the culprit of the problem.
To help you understand the situation, we have collected the best ideas about the Overhead door’s sudden shutdown.
These would give you an understanding of what you can do and of when a technician should come.
Garage Door repair is common now, so do not hesitate to call for one if the problem persists.
We do not want the door left as it is without putting it back to its optimal performance. Contact us now.
Reasons For Your Garage Door Not Closing All the Way
1. Your Garage Door is locked inside.
We frequently do not notice the smallest things when it comes to life.
If it is not impactful, we tend to look over it.
This one is the same as accidentally locking the Garage Door inside.
Until it can’t open or close, we will not check it.
Accordingly, there are manual locks with automatic Overhead Doors too.
It is used to avoid accidents in the area.
Check it from time to time to prevent nuisance situations related to it.
2. Your remote control is not working.
There are times when the answers to our problems are so simple, but we do not know it.
It is the same with Garage Door repair and remote control.
Due to a busy schedule, we rely on the later for it to always work.
We forget that it needs fresh batteries and maintenance.
Batteries are easy to replace, but other maintenance could take time.
It refers to resetting and reprogramming. If you can’t do this matter alone, better call for a Garage Door Repair company now.
3. Your door’s sensitivity needs adjustment.
Sensitivity is another matter when Garage Doors stop working. On your opener and remote control, there is a sensitivity setting.
Check it out and make sure that it is at the maximum level.
This one is a simple matter, but it has a massive impact on days that you want to rest after a long day.
Do not stress over it. Let us take your dilemma away; contact us.
4. Your springs and cables are smashed.
Both Torsion Spring and Extension Spring play a massive part in making the door close and open.
These two carry the burden of its weight. It is along the cable and track that this thing is possible.
If the matters do not work, then the Garage Door can’t close.
Look on top of the entryway, check if the springs and cables have squeaky sounds or if it looks rusty.
We can clean the spring, cable, and track to lessen the incident.
Then, we can also put lubrication so the three will work smoother. It will help to last longer.
5. Your Garage Door opener is busted.
The Garage Door opener is like a small computer box that processes its signals.
When it suddenly stops working, it will not open or close.
Refresh it from time to time by shutting it down.
It will help the box to reorganize itself.
However, make sure to open it again.
6. Your sensors are busted or misaligned.
Safety sensors were mandated by the government to be put on Garage Doors since 1993.
All manufacturing companies must follow this rule.
Hence, the photo-eye or photosensor was created.
The photo-eye is a twin sensor placed a few meters above the ground in the door.
It will help in detecting anything below it.
In some cases, the misaligned and it gives the wrong signal.
It may also bust, which delivers the same struggle.
7. Your Door sensors detected something underneath.
On number six, we have talked about how the photosensor can cause problems.
It works well, and it could be the reason why the Garage Door would not close.
Whatever the sensor reads will stop it.
Even dust is sometimes considered by it, so check for things under it when the door suddenly could not open or close.
A child or a pet might be there, and it would be wrong if the door closes on them.