Need Help?

    For garage door services around Pittsburgh ,better call a professional company.

    ☎️ (412) 871-6385

    Or, leave a message bellow.

    How To Open A Garage Door Manually

    Since the invention of doors long ago, it has been used to prevent any danger.

    It was used for security and later revealed to add beauty to anything it is on.

    Hence, everybody opted to have it installed anywhere and, most notably, in their homes.

    There are now a dozen places in the house with a door.

    One of them is the parking area where a Garage Door is located.

    We are so into this one nowadays because of its convenience. Although it was not like it before its first creation.

    Traditional Overhead Doors are commonly opened and closed manually.

    These were the first-ever kinds of Garage Doors.

    They would be made from wood, and they are heavyset.

    Over time, it developed into automatic ones that are better and more convenient.

    We love it even more because we need a remote control to open it.

    No human physical contact is required. We can stay in the car while it opens for us.

    Accordingly, we want to give you more knowledge about Garage Doors.

    Let us leave past the convenience and understand how it can still be manually open in a Garage Door emergency.

    Find out here the best pieces of information.

    Manually Opening and Closing Your Garage Door Explanation

    1. Traditional Garage Doors

    The traditional Garage Doors are long considered as manual.

    As they do not have any modern technology, we can only open it through physical strength.

    There are a number of these doors in the market today.

    There is the sectional, roll-up,tilt-up canopy, side hinged, slide to the side, and tilt-up retractable.

    All of these, again, open manually. Some can be by side and some by overhead.

    A torsion spring or extension spring will help in carrying the overall weight of your door. With it, there are the track and the cables.

    Even if it’s a swing type or overhead type, they will have the same parts.

    The parts will coil and release energy depending on what you want to do, opening or closing.

    Along with it, there will be the rollers and the drums. This two help in guiding the door as it does its work.

    The drum works together with the spring and track so it can balance well the heavy Garage Door.

    Then, the rollers are what its name says. This one is the main contributor to making sure the door goes to where it should be.

    With all of these parts, you can open the Garage door by swinging or pushing or pulling it.

    These ways are how they can be manually done.

    2. Automatic Garage Doors

    An automatic Garage Door is the newest invention of its kind.

    There have been several improvements on these since its first release.

    In 1993, the government imposed the photo-eye sensor to avoid injuries and death.

    As the development goes one, one thing does not change with the Overhead Door. It is the way it opens and closes.

    Notably, it goes the same with Traditional Garage Doors but with different parts.

    The modern doors have openers that receive the signal from the remote control to open it.

    Then, the springs and the other parts will help together to bring it up and down. There are no physical interactions here.

    In case we need to open it manually, we can still do it.

    Power interruption and busted openers are the most contributing reasons why we should do it.

    There are two ways on it from the inside and the outside.

    From the inside

    Open the secondary door’s lock first, there might be some because some families add them.

    Then, unplug the opener. Please get to the emergency release cord and pull it.

    We can now remove it after the two steps.

    Just make sure to close it securely before leaving the premises.

    From the outside

    There is an emergency release kit near the Garage Door outside.

    Locate it, then do the same steps in how to open from the inside.

    We will need again to unlock the release cord.

    Turn the key on it so it will reveal the cord.

    It will turn the door into its manual phase without the need to tinker its opener inside.

    Pull it and lift the block.

    Rate this post
    Michael Williams

    Michael Williams

    Over a decade in the garage door business has taught me that the most professional way to go is transparency with my clients. Why charge clients when they can clearly solve some of their garage trouble DIY? In this blog I will share as much as I can. If you still need help, don't hesitate to call!