Over time, your overhead garage door has become somewhat of an important part of our day to day lives.
After all, they provide us with the protection and added security that we need for our residential homes.
The comfort and convenience it provides is certainly not something anyone would want to miss.
Installing a garage door in Pittsburgh can be an easy thing to do as all you would need to do is to find yourself a garage door repair company that can help you out with your needs. ‘
However, choosing the right company for the job can be quite challenging and tricky.
You can even try doing the installation yourself; however, this isn’t recommended if you do not have the required knowledge and skills to do so.
This is because no matter how easy it may seem, garage door installation can be extremely dangerous if not done properly.
But, for those who are curious, how exactly is installing a garage door in Pittsburgh done?
Well, let us find out together.
How do you install a garage door?
Before we get to exactly how you can install a garage door, there are some things you need to prepare beforehand in order to get the job done.
You need to ensure that you have all the required tools for the job and the necessary knowledge needed to continue with the installation.
To start things, here are the different tools and equipment that you would probably need in order to install your garage doors:
- Level
- Locking pliers
- Drill
- Drill bits
- Philips driver
- Socket bit
- Hammer
- ½ inch diameter rods
- Adjustable wrench
- Safety glasses
As long as you have these tools at hand, all you would need else to have is the knowledge on how to install your door.
Now, in order to install your overhead garage doors properly, there are ten easy steps that you need to follow properly.
Without further ado, here are the different steps that you need to follow when installing a garage door in Pittsburgh.
Releasing the garage door tension
The first thing that you would need to do before we get to actually installing your garage door is to have the tension on your springs released beforehand.
This is done as a precautionary measure and to ensure your safety all throughout the process.
However, this process is only done if you have a previously installed garage door in your midst and if not, you may proceed directly to step 3.
In order to release the tension on your garage door springs, you may follow the following procedures:
- Using your locking pliers, clamp your torsion spring shaft and wedge your pliers against the wall above your overhead garage doors.
- After that, using your winding rod, hold the winding cone firmly in place while you loosen the screws holding it.
- Then, once the screws holding the winding cone are removed completely, slowly unwind your springs until your springs are free completely.
Disconnecting the garage door opener
If you have a garage door opener then most probably you also have your own garage door opener allowing you to freely open and close your garage doors.
Now in order to remove your previous completely, you must disconnect any connection it has with your garage door opener.
Do this by simply pulling on the red emergency release handle found on your doors.
Once done, you may now proceed to remove the hinges holding your panels in place and disconnecting all the other different components of your door one by one.
Installing your new garage door
Now that everything has been completely removed, you may now proceed to install your new garage doors.
You can do this by following the following steps:
- Attach the hinges of your new garage door to the topmost part of the door
- Attach axle supports to your top and bottom panels
- Place the bottom panel on the opening and make sure that it is leveled properly
- Install each panel accordingly one after the other and repeat until all panels have been successfully installed.
Securing the hinges and installing your garage door tracks
After having installed all your panels, make sure that everything is held tightly in place to the panel found on top of it.
Once this is done you may now proceed to install your garage door rollers on the sides of your garage door panels.
Install your garage door tracks then and make sure that the wheels are fitted correctly to it.
Finally, hold your garage door tracks firmly in place by mounting them to their brackets firmly.
Attach your spring assembly to your garage door tracks
Once the tracks are properly installed, start assembling all the pieces that will be supporting the spring and attach them to your tracks.
Fixing your tracks together
Line up all your horizontal and vertical tracks and connect these tracks by bolting them tightly together.
Installing your springs
Carefully install your garage door springs by attaching them to your spring locking cone.
Afterward, bolt the springs tightly to your header brackets in order to fit them tightly in place.
Installing your torsion rods and pulleys
Once the spring is properly installed, you may now then install the torsion rods by sliding them into the holes located on the side brackets.
Then, you can attach the pulley to each end of the rod.
Attaching your garage door cables
Carefully attach your cables to the pulley and turn the wheel once it is attached in order for any slack to be taut over the pulley.
Tighten your springs
Lastly, using your winding rod, tighten your springs and, with your manual’s help, determine how many turns would be required to tighten your spring properly.
Once the required tension is reached, secure your spring in place by tightening all the bolts in order to hold them firmly in place.
Conclusion
Installing a garage door in Pittsburgh may seem easy at first but it actually requires a lot of skill and attention.
Even if you have the required knowledge and skill to do so, you will still need to be careful when doing a task such as this.
For homeowners that do not have the slightest idea when it comes to jobs such as this, do not attempt to do so by yourselves and instead reach out to a professional for help.
If you are looking for a garage door repair company in Pittsburgh that can help you out with installing your garage doors, then Garage Door Repair Pitt is the one you are looking for.
Whatever service you may require of us, we will surely attend to it to the best of our abilities.
We also provide all sorts of residential and commercial garage door repair services such as garage door spring replacement, garage door cable repair, and etc.
Learn more about our different rates and services by calling us today or reaching out to us.
Allow us to help you out to the best that we can – choose Garage Door Repair Pitt now!
