Need Help?

    For garage door services around Pittsburgh ,better call a professional company.

    ☎️ (412) 871-6385

    Or, leave a message bellow.

    Garage Door Repairs Bethel Park Pa

    Check Out This Awesome Video On Garage Door Cable Repair

    Garage doors won’t function well without the cables.

    The cables are attached to the bottom part of the door going all the way up to the topmost part of it.

    The wires are rolled and rotating on a drum.

    A garage door can have a variety of cable types, which are based on the spring system of the door.

    It plays a very important part of letting the overhead door open smoothly and appropriately.

    One type you may find is the lift cable, which is the one holding the spring tension that equalizes the door’s weight, which enables us to lift the garage door no matter how heavy it is.

    Another type is the safety cable that can help the door from flying across the garage once springs snap or break.

    Having a broken cable will definitely cause an accident and imposes a great hazard for us.

    That is why it is vital for us to know the signs if our cable door needs to be repaired or replaced.

    It is best to call experts in guiding us to know the type of cable and how to fix it with the different types.

    Garage Door Cable Repair Service in Pittsburgh: How to Fix a Broken Cable

    If you have a garage door, then you know that the cables are an important part of the system. If one of these cables breaks, it can be a real pain to fix. In this blog post, we will walk you through the process of fixing a broken garage door cable. We will also provide some tips on how to prevent this from happening in the future.

    How much does it cost to replace cables on a garage door in Pittsburgh?

    The cost to replace cables on a garage door in Pittsburgh will vary depending on the size and type of garage door. However, the average cost is around $100-200.

    What are some common causes of broken garage door cables?

    There are several common causes of broken garage door cables. One of the most common reasons is when the cable becomes tangled in the door. This can happen if the cable is not properly secured or if it is damaged. Another common reason for cables breaking is when they become stretched out over time. This can be caused by wear and tear, as well as changes in the temperature.

    What are some tips for preventing garage door cables from breaking?

    There are several tips you can follow to prevent garage door cables from breaking. One of the most important things is to make sure that the cables are properly secured. You should also check the cables for damage on a regular basis and replace them if necessary. Additionally, it is important to keep the garage door in good condition by regularly lubricating all of the moving parts. This will help to prevent the cables from becoming stretched out over time.

    How do you reattach a garage door cable?

    The process of reattaching a garage door cable can be difficult, especially if you have never done it before. Here is a step-by-step guide on how to do it:

    • Remove the broken cable from the bracket
    • Loosen the bolts on the bracket and remove it from the door
    • Feed the new cable through the hole in the bracket
    • Secure the cable to the bracket and tighten the bolts
    • Repeat on the other side of the door

    Can you manually open a garage door with a broken cable?

    No, you cannot manually open a garage door with a broken cable. This is because the cables are what help to lift the door. Without them, the door will be too heavy to lift on your own.

    How do you replace a garage door extension cable?

    The process of replacing a garage door extension cable is similar to the process of replacing a regular garage door cable. However, there are a few additional steps that you will need to take. These steps include:

    • Removing the old extension springs
    • Installing the new extension springs
    • Attaching the new cables to the new springs
    • Reattaching the bracket to the door

    Can you repair a garage door cable without replacing it?

    In some cases, you may be able to repair a garage door cable without replacing it. This can be done by reattaching the cable to the bracket. However, this is not always possible and it may depend on the type of damage that has been done to the cable.

    If you have any questions about garage door cables or if you need help repairing a broken one, please contact us. We would be more than happy to assist you.

    Is My Garage Door Cable Broken?

    Broken or snapped cables are not only annoying but can also be a safety issue.

    It is very easy to identify if a cable is not functioning just by looking at it.

    If it is rusty, worn, bent, and out of the drum, they must be changed right away without question.

    Wear and tear will be the primary reason why cables are destroyed.

    An increase in tension over the years upon usage can make it snap, and exposure to humidity can deteriorate the cables.

    Try to observe how a garage door functions every now and then to know if it needs to be fixed even before it snaps.

    Aside from wear and tear, the following signs are important to know.

    • Is the door hard to open? A broken cable will hinder the door from opening unless you put force into it.
    • Is the door moving or closing too rapidly? A good working garage door can be closed and opened seamlessly. The cables might be loose or destroyed if they are moving too quickly.
    • Is the door lopsided? Once the door appears to be askew, it can be a sign of loose cables
    • Does it make a squeaky sound? If yes, then it might be the tension that can be too tight, or it can be that the cable is rusty.

    If all the listed signs are ticked yes, then it is certainly time for the cables to be repaired or replaced.

    Let Us Repair It For You

    Fixing a broken garage door cable can cause injuries to a person, most especially if they don’t have ample knowledge and expertise on how to operate them.

    Garage doors are large, hefty, and hard to maneuver.

    Cables work under tremendous tension, and the door’s movements can be abrupt, which is very dangerous.

    A lot of people met an accident trying to DIY their garage door problems.

    Hence, one must call for a repair service who are trained and certified to fix your cable problems.

    Try to avoid replacing or repairing the cables if you are not fully aware of how it works.

    At Garage Door Pitt, we offer 100% reliable and trustworthy garage door repairs with the help of our trained and expert staff.

    We figure out the problem with the cables and find the best way to fix it.

    We also know that the garage door is essential for a home’s safety; that is why, we repair or replace your cables as quickly and accurately.

    Avoid wasting time stressing yourself, trying to figure on how to fix it on your own.

    Stop spending money on buying kits but never having the assurance if you have assembled it well.

    Lastly, avoid posing a great hazard to your safety and health.

    For any cable problems, don’t hesitate to call us at Garage Door Pitt.

    Just go on with your day, sit back, relax, and let us do the work for you.

    You’ll have a good working garage door cable in no time, guaranteed safe and durable!

    5/5 - (1 vote)

    Recommended articles